BorgWarner Airwerks S363SX-E (8876)

BorgWarner S363SX-E – 76mm the sweet spot of the SX-E family

The 63mm inducer ‘SX-Enhanced’ 8776 redefines performance and value for modern turbochargers.  Utilizing BorgWarner’s EFR compressor aero with 63mm inlet, this reliable design flows up to 78.5lb/min at 122k rpm. This is paired with the legendary Airwerks 76mm S300 Inconel turbine wheel for great spool and flexible turbine housing options to fit a variety of builds.  The bearing housing is an oil-cooled journal bearing with uprated 360-degree thrust assemblies.  If you need 500-700hp worth of reliable airflow and don’t want to break the bank, this is your turbo.

Compressor Specifications

• • Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
  • Compressor Wheel OD (Exducer): 87.37mm
  • Compressor Wheel Inducer: 62.99mm
  • Max Flow Rate: 78.5 lb/min
  • Max Recommended Turbo Shaft Speed: 122374 RPM (560 m/s)
  • Compressor Housing Connections:
    • Inlet: 4.0″ Hose Coupler
    • Outlet: 2.5″ Hose Coupler

Turbine Specifications

• • Turbine Type: Inconel S300SX Turbine Wheel
  • Turbine Wheel OD: 76mm
  • Housing Material: D5S sandcast
  • Housing Size and A/R ratio: S300SX-E 8776 (S363) is available in three (3) different turbine housing configurations:
    • 0.88 A/R T4 Single Scroll
    • 0.91 A/R T4 Twin Scroll
    • 1.00 A/R T4 Twin Scroll

• Turbine Outlet: 3″ Marmon OR Optional 3″ V-Band

S300SX-E Compressor Map

BorgWarner SX-E Turbo Features

• Available as a complete turbo or Supercore (no turbine housing) to retrofit existing Airwerks installations.
• Forged milled compressor wheels with Optimized compressor blade aerodynamics
• All-new severe-duty 360-degree thrust bearing
• Compressor cover integrated speed sensor port and pre-machined boost port
• Flexible compressor cover outlet options: coupler or v-band
• Interchangeable with existing Airwerks turbine housings for plug-and-play upgrades
• Optional Turbo Speed Sensor Kit
• Optional Turbo Speed Gauge

S300SX-E Dimensions and Additional Information

This 63mm inducer SX-E turbo is available with 76mm turbine for earlier spool -or- 80mm  turbine for lower backpressure.  Drag Racers and V8 applications typically use the 80mm turbine.  Track and Street applications will use the 76mm for quicker response

If you have questions about this product or its installation, contact us.